Hannstar K Mv 4 94v 0 Manual

About HannStar Press Center Products Investor Relations Human Resources Social Responsibility. 1024 RGB x 768. Pixel Pitch (mm) 0.297. Luminance (nits) 250. Contrast Ratio. Response Time (ms) 12. View Angle (LR/UD) 160 / 140. Number of Colors Interface Outline Dimension (mm) Light Source Weight (g.

• 8909 Answers SOURCE: The location of the jumpers or dipswitches may vary; however, here are some locations of the jumpers / dipswitches. • On the edge of the motherboard - Most jumpers are located on the side of the motherboard for easy accessibility, verify by looking at all visible edges of the motherboard.

• By the CMOS battery - Some manufactures will place the jumper to clear the CMOS / BIOS password by the actual battery. • By the processor - Some manufactures will place the jumpers by the processor of the computer. However, note that in some cases these jumpers will be to change the processor and not the password. • Under the keyboard or bottom of laptop - If you are working on a the location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment. • Other visible location - While it is possible that the jumpers / dipswitches may not be in a visible location, most manufactures try to make things easier by placing the jumpers / dipswitches in another visible location. • Jumpers may also be found underneath or allongside the memory modules. I hope this helps but suggest that the manufacturers web site or your instruction manual, may have the answer.

Posted on Oct 23, 2010. Sintez psihodelikov v domashnih usloviyah.